The relevant provisions of the motor test

Parts of the Reduce Gear Motor during the non-metallic materials, Fire hazard testing, the test methods and test results of its assessment should be consistent with the priority provisions of the standard and supplementary regulations, in addition, shall meet the following additional provisions.Test points and sample a fixed position to exert.

Impact assessment of combustion of low-level shop.10mm thick silk paper covers the use of white pine wood, apply the test sample placed in the flame away from the site of 5mm at the bottom 200mm of soil. But for the actual installation of the Worm Reducer Motor position, the insulation component parts under no other non-metallic materials, and the components are enclosed within the motor when, from time according to the regulations, while the use of the actual underlying material as shop bottom samples from the subjects in line with the actual distance.

For the installation of insulation parts and live parts and live parts do not live adjacent to the insulation between metal parts components, should be resistant to leakage traces of the material, unless their creepage distance at least equal to twice the specified value .In the Single Phase AC Gear Motor according to the sample and the actual installation work in the most adverse conditions.Meets the requirements, in addition to ceramic materials and components used in the commutator or brushes that hold the insulation components, the following are to be signs of leakage tests to determine resistance.